|
|
|
|
|
|
|
Super Bass Extreme |
Optimized for corner mounting, Super Bass Extreme’s elegant wooden front is based on Vicoustic’s flagship Wave Wood panel. This is combined with a membrane, two high-density foam layers and a micro-perforated rear panel, with 1mm holes, that acts as a Helmholtz resonator. Designed to provide effective low frequency absorption between 60-125 Hz, it delivers maximum effectiveness between 75 -100Hz. The wooden front panel has two functions, providing sufficient mid-high frequency absorption to control corner reflections without deadening the sound, while simultaneously acting as a diffuser.
 |
 |
|
|
|
|
When porous materials such as foam are applied to corners or walls, they
become less efficient in dealing with low frequencies, because the
particle velocity or air movement associated with long wavelengths is
low. However, the sound pressure is at its maximum. Super Bass Extreme’s
internal membrane transforms this high pressure by converting the
pressure fluctuations into air motion. The membrane sympathetically
vibrates over a frequency range of 75-85 Hz, causing the air to pass
through a layer of high-density foam that absorbs the low frequencies.
Because of the high pressure it has also been possible to introduce a
further technique for aiding absorption, with the micro-perforated panel
at the back of the unit acting as a tuned Helmholtz resonator. Tests
actually showed the perforations to give 20% more efficiency, compared
to using a non-perforated panel.
Super Bass Extreme is highly recommended for smaller rooms with low
frequency issues. The panel can be used in different corner positions
and its modular structure allows further units to be added as required.
With an eye to interior design compatibility, Super Bass Extreme is
available in five elegant wood finishes that match Vicoustic’s range of
Wave Wood panels.
|
|
|
|
 |
|
|
|
|
|
|
|
|
|